Input | 100 - 125 VAC, 50/60 Hz |
AC Output | 15A@125VAC, 1875 VA MAX |
DC Output | 24VDC @ 100mA MAX |
DC Power Supply | IEC Class II |
Number of Receptacles | (1) NEMA 5-15R |
Tamper Resistant | Yes |
LED Indicator | Yes |
Conformance | UL60730, UL498, EN 61558, EN60730, EN62386 |
Environmental | -10C to +50C, non condensing |
Warranty | 2 Years |
Type of Sensor | Smoke and Heat Sensor |
Cable | 10 ft low voltage cable |
Sensor Length | between mounting holes: 3.4” (86.1mm) |
Sensor Width | between mounting holes: 1.8” (46.5mm) |
Sensor Height | 1” (25.4mm) |
Smoke Sensitivity | 1.06 ± .26% per foot |
Mounting Details | Use 4 screws to mount near the appliance
or device that will generate smoke or heat,
positioning as high up as possible or above
the smoke or heat source. |
Audible Alarm | Yes |
LED | Yes |
Temperature Alarm | Fixed set point 54°C ± 2°C (129°F ± 4°F) and ≥10°C (18°F) per minute temperature rise |
Conformance | The Safety Interlock Outlet is ETL approved as an Interlock device. The Smoke and Heat Sensor is not UL or ETL approved and is not for life safety. The Smoke and Heat Sensor is intended for supplementary protection and does not take the place of an approved smoke detector, as required by code. |
Warranty | 2 Years |
15 amp Safety Interlock Outlet is a single gang electrical outlet featuring one NEMA 5-15 receptacle and one interlock switch connector.
The Smoke and Heat Sensor mounts inside of enclosed spaces to de-energize the outlet if smoke or heat is detected.
The Safety Interlock Outlet is ETL approved as an Interlock device. The Smoke and Heat Sensor is not UL or ETL approved and is not for life safety. The Smoke and Heat Sensor is intended for supplementary protection and does not take the place of an approved smoke detector, as required by code.
All the specs, measurements and drawings needed to plan your in-drawer outlet project.
DOWNLOAD NOWSafety Interlock Box installation is easy with our step by step guide.
DOWNLOAD NOW